EUM-50
Hydraulic electrical upsetting machine is used for forging engine valve rods and other rod parts.
Main features:
1) The machine has two stations and can process two valves simultaneously.
2) It is equipped with PLC control and a colorful touch screen. Parameters can be adjusted using the touch screen interface.
3) The anvil and upsetting cylinder are controlled hydraulically.
S/C | Name | Specification | Unit | Remark | |
1 | Max. Hydraulic working pressure | 16 | Mpa | ||
2 | Max forging force | 120 | KN | ||
3 | Max. Stroke of forging cylinder | 500 | Mm | ||
4 | Max. Stroke of anvil cylinder | 200 | Mm | ||
5 | Max. Stroke of clamping cylinder | 50 | Mm | ||
6 | Rod diameter | 10-13 | Mm | ||
7 | Rod length | 700 | Mm | ||
Heat | Power | 50 | KVA | 2 sets | |
Primary voltage | 380 | V | |||
Frequency | 50 | Hz | |||
Oil pump | Specification | YB1-40 | |||
Pressure | 10 | Mpa | |||
Flow | 40 | Ml/r | |||
Motor | Power | 7.5 | KW | ||
Speed | 960 | R/min | |||
Hydraulic electrical upsetting machine is used for forging engine valve rods and other rod parts.
Main features:
1) The machine has two stations and can process two valves simultaneously.
2) It is equipped with PLC control and a colorful touch screen. Parameters can be adjusted using the touch screen interface.
3) The anvil and upsetting cylinder are controlled hydraulically.
S/C | Name | Specification | Unit | Remark | |
1 | Max. Hydraulic working pressure | 16 | Mpa | ||
2 | Max forging force | 120 | KN | ||
3 | Max. Stroke of forging cylinder | 500 | Mm | ||
4 | Max. Stroke of anvil cylinder | 200 | Mm | ||
5 | Max. Stroke of clamping cylinder | 50 | Mm | ||
6 | Rod diameter | 10-13 | Mm | ||
7 | Rod length | 700 | Mm | ||
Heat | Power | 50 | KVA | 2 sets | |
Primary voltage | 380 | V | |||
Frequency | 50 | Hz | |||
Oil pump | Specification | YB1-40 | |||
Pressure | 10 | Mpa | |||
Flow | 40 | Ml/r | |||
Motor | Power | 7.5 | KW | ||
Speed | 960 | R/min | |||
