Home » Products » Plasma Welding Machine » Generic Engine Valve Tip Plasma Welding Machine

Generic Engine Valve Tip Plasma Welding Machine

Description

Plasma Tip Weld Machine

1) Non-transfer arc power supply: Japan SanRex digital welding machine. No load voltage: 55V, current: 0-200A;

2) Transfer arc power supply: Japan SanRex digital welding machine. No load voltage: 55V, current: 0-200A;

3) Feeder mechanism: Wheeler feeder mechanism, powder feeder quantity: 0-50g, volume:4 kg, no powder will be ring;

4) Torch: Stellite 600 welding torch, welding current: 5-200A, powder grain: 80-320 mesh;

5) Electrical components: Mitsubishi touch screen and Mitsubishi PLC, Schneider low-voltage electrical components;

6) Pneumatic components: AirTAC

7) Torch moving system: imported precision electrical module unit and manual adjustment slider;

8) The worker put the valves on the rail of machine, welding, blanking automatically and can storage 30 sets welding program;

9) Cooling system: Standard water chiller. Including compressor and high pressure water pump;

10) DC motor clean torch mechanism;

Parameter of Machines

#	Name	Unit	Parameter
1	X-axis torch max. stroke (manual)	mm	50
2	Y-axis torch max stroke	mm	200
3	Z-axis torch max stroke (Manual)	mm	50
4	Worktable speed	rpm/min	0.5-100
Welding parameter
1	Non-transfer current	A	5- 100
2	Transfor current	A	5-200
3	Transfer Arc voltage	KW	20-32
4	Powder feeder flow	g/min	0-50
5	Tungsten diameter	mm	3.2
6	Plasma gas flow	L/h	0-150
7	Powder gas flow	L/h	0-300
8	Shielding gas flow	L/h	0-1500
9	Cooling water pressure	Mpa	＞0.2
10	Cooling water temperature control	Degree	5-40
11	Total power	KW	6.5
12	Power supply	V	220V 30Hz
13	Voltage	V	380V±10% 50Hz